3.3 KVA Transformer
This heavy duty 3.3 KVA Transformer offers twin 16 amp outlets with an overload protection switch.
The perfect answer to run site drills and 500w floodlights for example.
Made from a tough resin these units are perfect for arduous site use.
5 KVA Transformer
This heavy duty 5 KVA Transformer offers twin 16 amp outlets and one 32 amp outlet.
It has an intermittent rating of 5000W (duty cycle 5 mins on / 15 mins off) and a continuous rating of 2500W. The can be used with larger corded power tools such as SDS drills, demolition hammers and circular saws. They are also suitable for other products such as lights and fans.
They are centre tapped to earth for extra safety and have an over temperature cut-out switch.
The unit weighs 32kg and conforms to BSSEN 61558-1
10 KVA Transformer
The MC100 is a 10 KVA 110v transformer designed for use where a constant supply of 110 volts is required for the use of multiple tools or as a distribution point. The MC100 provides 4 x 16 amp outlet sockets and 2 x 32 amp outlet sockets. The MC100 has a steel casing designed for arduous site life, with carrying handles fitted either side for ease of movement to new locations if required.
The MC100 is fitted with a safety overload switch and requires a continuous 230v 50hz supply via a standard 3 pin fused plug. The unit is perfect to run our breathing apparatus compressors and has power to spare.
All units are supplied with a minimum 3 metre supply leads.