Fall Arrest / Fall Arrest Recovery Blocks
Rebel Fall Arrest Blocks
The Protecta Rebel range of fall arrest blocks offer quality engineering at a seriously sensible price. With Rebel blocks starting from 6 metre cable lengths utilising either plastic or aluminium housings and offering up to 30 metres they truly offer a complete range.
The units have a 140kg capacity for the operator and tools.
They have a top swivel and a swivel hook to limit lifeline twisting whilst in use and a built in carry handle for easy transport and setup.
Due to the choice these units will suit any budget and coming from the Capital Safety Group stable you know that you’re choosing quality.
| Weekly hire rate excluding VAT | |
| Rebel Self-Retracting Lifeline 6 metre | £25.00 |
| Rebel Self-Retracting Lifeline 10 metre | £30.00 |
| Rebel Self-Retracting Lifeline 15 metre | £32.50 |
| Rebel Self-Retracting Lifeline 20 metre | £37.50 |
| Rebel Self-Retracting Lifeline 25 metre | £42.50 |
| Rebel Self-Retracting Lifeline 30 metre | £49.00 |
| Sales price excluding VAT | |
| Plastic Housing: Galvanised Rope | |
| Rebel Self-Retracting Lifeline 6 metre | £398.40 |
| Rebel Self-Retracting Lifeline 10 metre | £417.10 |
| Rebel Self-Retracting Lifeline 15 metre | £600.20 |
| Rebel Self-Retracting Lifeline 20 metre | £688.90 |
| Rebel Self-Retracting Lifeline 25 metre | £764.40 |
| Rebel Self-Retracting Lifeline 30 metre | £911.90 |
| Plastic Housing: Stainless Steel Rope | |
| Rebel Self-Retracting Lifeline 10 metre | £512.50 |
| Rebel Self-Retracting Lifeline 15 metre | £662.30 |
| Rebel Self-Retracting Lifeline 20 metre | £760.00 |
| Rebel Self-Retracting Lifeline 25 metre | £838.80 |
| Rebel Self-Retracting Lifeline 30 metre | £1,003.00 |
| Service price excluding parts and VAT | |
| All Rebel Self-Retracting lifelines | £50.00 |
| Plastic Housing: | |
| Physical Weight: | 6m: 5.3kg 10m: 5.6kg 15m: 7.5kg 20m: 10.0kg 25m: 13.0kg 30m: 13.4kg |
| Dimensions: | 6m: 12cm x 25cm x 57cm 10m: 12cm x 25cm x 57cm 15m: 12cm x 28cm x 61cm 20m: 14cm x 33cm x 65cm 25m: 14cm x 33cm x 65cm 30m: 14cm x 33cm x 65cm |
| Safe Working Load: | 140kg for operator and tools |
| Standards: | EN360: 2002 CNB/P: 11.060 |
Rebel 15m Fall Arrest Retrieve Block
The Rebel 15m Fall Arrest Retrieve Block adds versatility and convenience to the trusted Rebel self-retracting lifelines. These models incorporate fall arrest and a built-in emergency fall arrest retrieval system. The retrieval facility gives added peace of mind that, should a fall occur, the operative rescue plan has already been catered for.
This unit can be provided with an option of a stainless steel cable or a galvanised cable.
| Weekly hire rate excluding VAT | |
| Rebel 15m Fall Arrest Retrieve Block with Bracket | £56.00 |
| Rebel 15m Fall Arrest Retrieve Block with Scaffold Karabiner | £56.00 |
| Sales price excluding VAT | |
| Rebel 15m Fall Arrest Retrieve Block with Galvanised Rope | £801.00 |
| Rebel 15m Fall Arrest Retrieve Block with Stainless Steel Rope | £865.40 |
| Rebel 15m Fall Arrest Retrieve Block Bracket for P-T7 | £94.40 |
| Rebel 15m Fall Arrest Retrieve Block Bracket for AM100 | £252.20 |
| Service price excluding parts and VAT | |
| Rebel Fall Arrest Retrieve Block | £65.00 |
| Physical Weight: | 11.9kg |
| Dimensions: | 14cm x 28cm x 61cm |
| Safe Working Load: | 140kg for operator and tools |
| Standards: | CE EN 360: 2002 EN 1496: 2006 class B |
RGA3 Fall Arrest Block
The RGA3 is a 15 metre fall arrest block, constructed using rugged aluminium cases for durability. The RGA3 will handle the arduous pressures of site use and with the use of a bracket can also be fitted to a tripod.
The unit incorporates a fall indicator for peace of mind and safety.
| Weekly hire rate excluding VAT | |
| RGA3 15m Fall Arrest Block | £32.50 |
| Sales price excluding VAT | |
| RGA3 15m Fall Arrest Block | £758.27 |
| Karabiner | £45.00 |
| Service price excluding parts and VAT | |
| RGA3 Fall Arrest Block | £50.00 |
| Physical Weight: | 10.5kg |
| Maximum Force: | <6kN |
| Maximum User Weight: | 140kg |
| Standards: | EN360: 2002 |
RGA3/Edge Fall Arrest Block
The RGA3/Edge is a 15 metre fall arrest block, constructed using rugged cast alloy casings for durability. The RGA3 will handle the arduous pressures of site use and with the use of a bracket can also be fitted to a tripod.
The cable is 5mm galvanised wire and has a double action high tensile steel swivel karabiner. The addition of a shock pack to the unit means it can be used whilst working over the edge.
The unit incorporates a fall indicator for peace of mind and safety.
The RGA3/Edge has been accredited to EN 360:2002 and VG11.060 and has a maximun user weight of 140kg.
| Weekly hire rate excluding VAT | |
| RGA3/Edge 15m Fall Arrest Block | £32.50 |
| Sales price excluding VAT | |
| RGA3/Edge 15m Fall Arrest Block | £758.27 |
| Karabiner | £45.00 |
| Service price excluding parts and VAT | |
| RGA3/Edge Fall Arrest Block | £50.00 |
| Physical Weight: | 9.6kg |
| Maximum Force: | <6kN |
| Maximum User Weight: | 140kg |
| Standards: | EN 360:2002 VG11.060 |
RGA4 Fall Arrest Block with Recovery Winch
The RGA4 is a 15 metre fall arrest block with recovery winch is constructed from rugged aluminium cases for durability. The unit has a fall indicator tag for added peace of mind. All fall arrest recovery blocks are designed primarily as a fall arrest unit, with a single use retrieval facility.
The retrieval facility gives added peace of mind that, should a fall occur, the operative rescue plan has already been catered for.
The unit has been acredited to EN 360:2002 and has a maximum user weight of 140kg.
| Weekly hire rate excluding VAT | |
| RGA4 Fall Arrest Block with Recovery Winch with Bracket | £56.00 |
| RGA4 Fall Arrest Block with Recovery Winch with Scaffold Karabiner | £56.00 |
| Sales price excluding VAT | |
| RGA4 Fall Arrest Block with Recovery Winch | £1,092.50 |
| RGA4B Bracket for RGA4 | £186.30 |
| Scaffold Karabiner to fit RGA4 | £45.00 |
| Service price excluding parts and VAT | |
| RGA4 Fall Arrest Block with Recovery Winch | £65.00 |
| Physical Weight: | 11.4kg |
| Maximum Force: | <6kN |
| Maximum User Weight: | 140kg |
| Standards: | EN 360:2002 |
RGA4H/Edge Fall Arrest Block with Recovery Winch
The RGA4H is a 15 metre fall arrest block with a shock pack which means it can be used whilst working over the edge. The block has a steadying handle fitted with an up/down winch mechanism. The unit has a fall indicator tag for added peace of mind.
The unit is constructed with durable cast alloy casings and comes with a 5mm galvanised wire cable and double action high tensile steel swivel karabiner. It has a maximum user weight of 140kg.
All fall arrest recovery blocks are designed primarily as a fall arrest unit, with a single use recovery facility. The recovery facility gives added peace of mind that, should a fall occur, the operative rescue plan has already been catered for as the operative can be winched up or down to safety in the event of an emergency.
The unit has been accredited to EN 360:2002, EN 1496:2017 B and VG11.060.
| Weekly hire rate excluding VAT | |
| RGA4H/Edge Fall Arrest Block with Recovery Winch with Bracket | £56.00 |
| RGA4H/Edge Fall Arrest Block with Recovery Winch with Scaffold Karabiner | £56.00 |
| Sales price excluding VAT | |
| RGA4H/Edge Fall Arrest Block with Recovery Winch | £1,092.50 |
| RGA4B Bracket for RGA4 | £186.30 |
| Scaffold Karabiner to fit RGA4 | £45.00 |
| Service price excluding parts and VAT | |
| RGA4H/Edge Fall Arrest Block with Recovery Winch | £65.00 |
| Physical Weight: | 11.2kg |
| Maximum Force: | <6kN |
| Maximum User Weight: | 140kg |
| Standards: | EN 360:2002 EN 1496:2017 B VG11.060 |
Tuff-Bloc Self Retracting Lifeline
The Tuff-Bloc self retracting lifeline features an energy absorbing over-mould nylon housing suitable for robust environments. This unique housing provides protection to the internal mechanisms and allows for easy storage when stacking.
It is available in four lengths; 6m, 10m, 15m and 20m.
It has a built in fall indicator and comes with a double action karabiner and a steel snap hook. It provides fall protection up to a 30 degree angle from centre and is rated for 140kg. The unit comes with an Ezy-Grip handle for ease during installation.
The Tuff-Bloc SRL is certified to EN 360:2002.
| Weekly hire rate excluding VAT | |
| Tuff-Bloc Self Retracting Lifeline - 10m | £30.00 |
| Tuff-Bloc Self Retracting Lifeline - 20m | £37.50 |
| Sales price excluding VAT | |
| Tuff-Bloc Self Retracting Lifeline - 6m | £466.45 |
| Tuff-Bloc Self Retracting Lifeline - 10m | £504.82 |
| Tuff-Bloc Self Retracting Lifeline - 15m | £549.58 |
| Tuff-Bloc Self Retracting Lifeline - 20m | £773.38 |
| Service price excluding parts and VAT | |
| Tuff-Bloc Self Retracting Lifeline | £50.00 |
| Physical Weight: | 6m: 4.0kg 10m: 4.9kg 15m: 7.3kg 20m: 9.8kg |
| Dimensions: | 6m: 730mm x 100mm x 180mm 10m: 750mm x 100mm x 210mm 15m: 800mm x 110mm x 230mm 20m: 850mm x 110mm x 290mm |
| User Rating: | Rated for user's up to 140kg |
| Standards: | EN360: 2002 |
Kratos Fall Arrest Blocks
Kratos compliance blocks with either a 25 metre or 30 metre galvanised steel wire rope.
These units offer an indicator hook which shows if the unit has taken a fall and requires servicing. They are supplied with 1 steel screw karabiner and a steel snap hook.
Both of these fall arrest units comply with the latest EU legislation and ensure that your body will not exceed the 2 metre drop test limits or the 6kN impact requirement upon the body.
| Weekly hire rate excluding VAT | |
| FA 20 400 25 Retractable Fall Arrest Block 25 metre Wire Rope | £42.50 |
| FA 20 400 30 Retractable Fall Arrest Block 30 metre Wire Rope | £49.00 |
| Sales price excluding VAT | |
| FA 20 400 25 Retractable Fall Arrest Block 25 metre Wire Rope | £815.00 |
| FA 20 400 30 Retractable Fall Arrest Block 30 metre Wire Rope | £839.50 |
| Service price excluding parts and VAT | |
| All Kratos Retractable Fall Arrest Blocks with any length of Wire Rope | £50.00 |
| Physical Weight: | FA20 400 10: 4.30kg FA20 400 15: 6.80kg FA20 400 20: 7.22kg FA20 400 25: 12.32kg FA20 400 30: 12.75kg |
| Dimensions: | FA20 400 10: 390mm x 172mm x 87mm FA20 400 15: 279mm x 223mm x 94mm FA20 400 20: 279mm x 223mm x 94mm FA20 400 25: 425mm x 278mm x 109mm FA20 400 30: 425mm x 278mm x 109mm |
| Breaking Strength: | >12kN |
| Safe Working Load: | Approved for a user with a maximum weight of 140kg in vertical use |
| Standards: | EN360: 2002 ATEX Directive 2014/34/EU |
| ATEX Marking: | Ex 11 2G Ex h 11C T6 Gb |
Kratos Fall Arrest Retrieve Blocks
The Kratos fall arrest retrieve blocks have a polymer casing, galvanised steel wire rope and have a built in indicator hook and carrying handle. The units conform to EN360 for fall arrest and EN1496 for emergency recovery with a rated worker maximum load of 140kg.
The block is simple to use providing fall protection up to a 40 degree angle from centre. If the worker takes a fall the emergency recovery handle can be engaged to recover the worker. This then takes care of regulation 5 as your emergency rescue plan.
A fall arrest retrieve block can only be used as a secondary device as it is not designed for full man riding other than for an emergency rescue.
| Weekly hire rate excluding VAT | |
| FA 20 401 30 Retractable Fall Arrest Retrieve Block 30m Wire Rope | £65.00 |
You may need a special karabiner to install this unit
| Sales price excluding VAT | |
| FA 20 401 20 Retractable Fall Arrest Retrieve Block 20m Wire Rope | £1,074.50 |
| FA 20 401 30 Retractable Fall Arrest Retrieve Block 30m Wire Rope | £1,425.50 |
| Service price excluding parts and VAT | |
| All Kratos Fall Arrest Retrieve Blocks | £65.00 |
| Physical Weight: | FA20 401 20: 9.2kg FA20 401 30: 14.8kg |
| Dimensions: | FA20 401 20: 304mm x 279mm x 96mm FA20 401 30: 425mm x 278mm x 109mm |
| Breaking Strength: | >12kN |
| Safe Working Load: | Approved for a user with a maximum weight of 140kg in vertical use |
| Standards: | EN360: 2002 EN1496: 2017 ATEX Directive 2014/34/EU |
| ATEX Marking: | Ex 11 2G Ex h 11C T6 Gb |
Self-Retracting Sealed-Blok
The Sala Sealed-Blok series are the ultimate in durability and design. Rugged and made to last, the spring and bearing housing is sealed to a rating of IP 67 which means that the unit can be submerged to 1 metre for 30 minutes. With the addition of stainless steel wire ropes and the huge range in lengths these blocks are ideal for offshore and harsher environments.
These blocks are built so that they follow the definition of the law. That is that the block should always be used in fall arrest mode as a safety back up to the personnel descending using a ladder or step irons, or as a secondary device.
Only if a fall takes place should the recovery handle be used, the unit should then be serviced by an authorised service house.
You may require brackets to fit these units to tripods or davits and please contact us for assistance.
| Weekly hire rate excluding VAT | |
| Self-Retracting Sealed-Blok 15 metre Stainless Steel Wire Rope | £50.00 |
| Self-Retracting Sealed-Blok 25 metre Stainless Steel Wire Rope | £70.00 |
| Self-Retracting Sealed-Blok 40 metre Stainless Steel Wire Rope | £90.00 |
| Self-Retracting Sealed-Blok 15 metre Stainless Steel Wire Rope with Rescue Winch | £56.00 |
| Self-Retracting Sealed-Blok 25 metre Stainless Steel Wire Rope with Rescue Winch | £110.00 |
| Self-Retracting Sealed-Blok 40 metre Stainless Steel Wire Rope with Rescue Winch | £195.00 |
| Sales price excluding VAT | |
| Self-Retracting Sealed-Blok 9 metre Stainless Steel Wire Rope | £1,205.80 |
| Self-Retracting Sealed-Blok 15 metre Stainless Steel Wire Rope | £1,469.25 |
| Self-Retracting Sealed-Blok 25 metre Stainless Steel Wire Rope | £1,840.60 |
| Self-Retracting Sealed-Blok 40 metre Stainless Steel Wire Rope | £2,558.80 |
| Self-Retracting Sealed-Blok 9 metre Stainless Steel Wire Rope with Rescue Winch | £2,255.45 |
| Self-Retracting Sealed-Blok 15 metre Stainless Steel Wire Rope with Rescue Winch | £2,768.10 |
| Self-Retracting Sealed-Blok 25 metre Stainless Steel Wire Rope with Rescue Winch | £3,036.65 |
| Self-Retracting Sealed-Blok 40 metre Stainless Steel Wire Rope with Rescue Winch | £3,608.70 |
| Service price excluding parts and VAT | |
| All Self Retracting Sealed-Bloks | £50.00 |
| All Self Retracting Sealed-Bloks with Retrieval Winch | £65.00 |
Blocfor ESD G Fall Arrester
The Blocfor ESD fall arrest device is suitable for use on terrace roofs and complies with CNB/P/11.062.
The unit can be used vertically or with a standard deviation of 20° in relation to vertical and also for horizontal use without the use of a lanyard between the end of the strap and the harness. The unit complies with EN 360 and CNB/P/11.060 standards for use on edges with a minimal 0.5 mm curve radius.
The Blocfor ESD includes the Energy System Dissipater (ESD) technology that enables the unit to arrest a fall even when the webbing is fully unwound and ensures there is an impact force of less than 6 kN in the event of a fall.
The Blocfor ESD is lightweight with a ABS fibre reinforced polyaminde housing and has a standard M47 swivel connector at the end of the shock absorber and a M10 connector on the unit. They are available in 3 lenghts of 10m, 20m and 30m and have a total user capacity of 150kgs
| Sales price excluding VAT | |
| Blocfor 10 ESD G M10-M47 - 10m Galvanised Cable | £250.00 |
| Blocfor 20 ESD G M10-M47 - 20m Galvanised Cable | £691.00 |
| Blocfor 20 ESD G M10-M47 - 30m Galvanised Cable | £1,247.00 |
| Service price excluding parts and VAT | |
| Blocfor ESD Fall Arrester | £50.00 |
| Physical Weight: | Blocfor 10 ESD G: 4.9kg Blocfor 20 ESD G: 8.5kg Blocfor 30 ESD G: 15.70kg |
| Dimensions: | Blocfor 10 ESD G: 240mm x 190mm x 98mm Blocfor 20 ESD G: 900mm x 276mm x 118mm Blocfor 30 ESD G: 930mm x 298mm x 133mm |
| Safe Working Load: | Total user weight of 150kg |
| Standards: | EN360 VG11 CNB/P/11.060 technical data sheet "use on terrace roof" CNB/P/11.062 "Fall arrest with a capacity of more than 100 kg |
Blocfor ESD R Fall Arrester with Rescue Handle
The Blocfor ESD R Fall Arrester with Rescue Handle is suitable for use on terrace roofs and complies with CNB/P/11.062.
The unit can be used vertically or with a standard deviation of 20° in relation to vertical and also for horizontal use without the use of a lanyard between the end of the strap and the harness. The unit complies with EN 360, EN 1496B and CNB/P/11.060 standards for use on edges with a minimal 0.5 mm curve radius.
The Blocfor ESD R includes the Energy System Dissipater (ESD) technology that enables the unit to arrest a fall even when the webbing is fully unwound and ensures there is an impact force of less than 6 kN to the user in the event of a fall.
The Blocfor ESD R has a ABS fibre reinforced polyaminde housing that is resistant to shocks and aging. It has a standard M47 swivel connector at the end of the shock absorber and a 25mm anchorage on the unit to accomodate large-diameter connectors. They are available in 2 lenghts of 20m and 30m and have a total user capacity of 150kgs
| Sales price excluding VAT | |
| Blocfor 20 ESD R Fall Arrester with Rescue Winch - 20m Galvanised Cable | £1,472.00 |
| Blocfor 30 ESD R Fall Arrester with Rescue Winch - 30m Galvanised Cable | £1,850.00 |
| Service price excluding parts and VAT | |
| Blocfor 30 ESD R Fall Arrester with Rescue Winch | £65.00 |
| Physical Weight: | Blocfor 20 ESD R: 9.34kg Blocfor 30 ESD R: 16kg |
| Dimensions: | Blocfor 20 ESD R: 930mm x 275mm x 100mm Blocfor 30 ESD R: 930mm x 320mm x 130mm |
| Safe Working Load: | Total user weight of 150kg |
| Standards: | EN360 EN1496 Class B VG11 CNB/P/11.060 technical data sheet "use on terrace roof" CNB/P/11.062 "Fall arrest with a capacity of more than 100 kg |
Saver Fall Arrester with Integrated Emergency Rescue Mechanism
The Saver is a retractable fall arrester with an integrated emergency rescue mechanism for raising or lowering personnel to safety following a fall
The recovery handle has a shock absorbing brake mechanism and an anti-run brake so that if the winding handle is released during lifting the winch automatically locks until the handle is rotated by the operator. It has a stopping distance of 0.6m to 1m and a retrieval speed of approximately 3m per minute. The karabiner has an incorporated fall indicator.
The unit can be mounted vertically overhead with up to a 30° angle from centre, with a diverter pulley, or horizontally providing the rope does not pass over sharp or abrasive edges, masonry or steelworks or other items that may catch, trap or shear the wire rope.
The Saver Fall Arrester has a maximum weight limit of 141kg and is available in 3 rope lengths of 14m, 20m and 34m.
The Saver is also available with a high performance HMPE fibre line which is beneficial in environments with electrocution risks. This low stretch line is up to 70% stronger that the current steel wire with less than half the density which reduces the overall weight of the unit by up to 2.5kg.
The unit is certified to EN 360:2022 and EN 1496:2006 Class B.
| Sales price excluding VAT | |
| Saver 14m Galvanised Rope & Zinc Plated Steel Snap Hook | £904.00 |
| Saver 14m Stainless Steel Rope & Stainless Steel Snap Hook | £1,125.00 |
| Saver 14m HMPE Fibre Line & Zinc Plated Steel Snap Hook | £1,200.00 |
| Saver 20m Galvanised Rope & Zinc Plated Steel Snap Hook | £1,095.00 |
| Saver 20m Stainless Steel Rope & Stainless Steel Snap Hook | £1,257.00 |
| Saver 34m Galvanised Rope & Zinc Plated Steel Snap Hook | £1,439.00 |
| Saver 34m Stainless Steel Rope & Stainless Steel Karabiner | £1,687.00 |
| Saver to G.Tripod Upper Mounting Bracket | £110.00 |
| Saver to G.Tripod Lower Mounting Bracket | £135.00 |
| Saver 14m to G.Tripod One-Piece Mounting Bracket | £185.00 |
| Saver 20m to G.Tripod One-Piece Mounting Bracket | £225.00 |
| Saver 34m to G.Tripod One-Piece Mounting Bracket | £240.00 |
| Service price excluding parts and VAT | |
| Saver Fall Arrest Block with Rescue Winch | £65.00 |
| Description | Weight: (approx.) | MWL: |
| Saver 14m Galvanised Rope & Zinc Plated Steel Snap Hook | 12.5kg | 141kg |
| Saver 14m Stainless Steel Rope & Stainless Steel Snap Hook | 12.5kg | 141kg |
| Saver 14m HMPE Fibre Line & Zinc Plated Steel Snap Hook | 10.0kg | 141kg |
| Saver 20m Galvanised Rope & Zinc Plated Steel Snap Hook | 17.0kg | 141kg |
| Saver 20m Stainless Steel Rope & Stainless Steel Snap Hook | 17.0kg | 141kg |
| Saver 34m Galvanised Rope & Zinc Plated Steel Snap Hook | 23.0kg | 141kg |
| Saver 34m Stainless Steel Rope & Stainless Steel Snap Hook | 23.0kg | 141kg |
