Tripods & Winches
The
Sala P-W60L / P-W120L Total Control Winches The P-W60L and P-W120L full man
riding, wire rope winch, has a braked lowering facility and a safety overload,
this ensures the wearer cannot be injured in a recovery situation. The winch
offers a free wheel lowering facility which is controlled by the top man.
This facility has a built in overspeed brake with energy absorbing capacity,
similar to self retracing life lines, and so gives added fall protection.
As with all Sala winches the unit has a quick fit mount which fits directly
to either P-T7 or P-T9 tripods. The P-W60L offers an 18.5 metre cable and
the P-W120L a 37 metre cable. 
The Sala Integra R offers a 15m fall arrestor with an emergency winch feature,
which allows for retrieval in either direction, up or down. The emergency
winch is activated by pulling the handle knob out and pushing the handle boss
in. The unit has a wear tag, built into the karabiner, this allows for an
easy inspection check, to ensure it has not received a severe shock and requires
servicing. As with all Sala products the 580R can be fitted to either P-T7
or P-T9 tripods via a quick fit bracket as detailed. The wire rope is drawn
out as the operative requires it and should a fall occur will lock. This ensures
the operative the freedom of movement, without relying on the top man to pay
out the correct amount of line. As the 580R is a fall
arrest retrieve block, it must be remembered that the unit must be used in
conjunction, with either step irons, or a ladder. The winch facility is for
emergency use only, it is not intended for full man riding purposes.
The Sala DBS12 is a 12 metre fall arrestor ideal for any situation where a
fall is possible. The unit allows the operative to move freely unless a fall
occurs, if this happens the unit locks until the weight is released. The unit
has a visual shock indicator which shows if the unit requires servicing before
its normal service interval.
Yale Fall Arrestors
Yale offer two lengths of fall arrest block the YLA2 8 metre and the YLA3
15 metre. Both of these units have an activation tag located in the karabiner
so that a shock incident can be readily idetified so that the unit can be
returned for service immediatly. The cables on both units are available in
either stainless or galvanised wire.
Yale YLA4
The Yale YLA4 15 metre fall arrest retrieval block offers the same protection
as the YLA2/3 with the added benifit of a recovery winch. The winch mechanism
is only designed to be used in an emergency situation and is not for man riding
as a normal use. The winch mechanism can be used to raise or lower in a shock
instance, the lowering being more benifical in a height safety requirement
i.e. scaffolding. An extra support handle cna be fitted when used on scaffolding
to make the winch mode more user friendly.
We offer a wide range of fall arrestors starting from 2.5 metre
lengths to 30 metres
The
ATSR-1 tripod has the latest technology, with oval legs it ensures easy pin
location. By having three stage legs all of which are multi-positionable it
reduces to a compact 1.37m and yet extends to a height of 2.67m. The tripod
comes complete with a quick fit attachment which will fit virtually all makes
of winch and fall arrest blocks.
Technical Specifications -
Max
Working Height 2.67m
Min Working Height 1.68m
Weight 17.6kg
Packed Length 1.37m
Safe Working Load 200kg
Accreditation EN 795
The
Sala PT7 tripod (not shown) is designed for man entry and is manufactured
from aluminium. It has a quick fit mounting bracket attached to one leg to
which all the Sala winches and fall arrestors shown above will attach to.
The wire rope is fed over two pulleys and held in place with securing pins
so as to ensure that the rope cannot retract back to the winch. On this tripod
all three legs have multi positioned holes so that it can be used on any surface.
The tripod also has two extra anchor points so that any circumstance can be
catered for. A safety chain provides a belt and braces option in case a leg
is damaged by machinery whilst in use.
 |
Portable
Davit with a P-W60L winch fitted
The portable Davit is ideal for large square or rectangular manholes where a tripod is almost impossible to locate. The Davit has two quick fit connections which means that a full man riding winch can be mounted along with a secondary backup system as specified by some water authorities. The base legs are held via a pin and 'R' clip and the Davit arm itself slots into the base making it possible to collapse the whole system down to fit into most vans. The legs all have adjustable plates so that it can be set to suit various ground conditions. |
SL1/2 1000 kg Shearlegs
These Shearlegs are
made with split legs so they can be collapsed to a more readily transportable
size. The top eye mounting is designed to suit chain blocks for the lifting
of goods up to 1000 kg. The floor to eye measurement is 2 metres to allow
for ease of locating and extracting items to be lowered or raised.
The Shearlegs are designed
for the lifting of goods only and are not certified for man riding.
Chain Hoists
We offer a complete range of Chain Hoists available in lengths to suit your
requirement. We offer 1000 kg chain hoists with an 8m drop in our hire fleet
to accompany our shearlegs all other types and lenghts etc are on a sales
basis.
Manhole
Lifting Eyes
This
manhole lifting eye has been designed to last by having no thread and a 30mm
case hardened shaft. The heavy duty 10mm steel washer is secured into place
with a pin and snap ring. The pin can only be placed in the correct position
and is secured via a retaining wire to the washer so as to prevent loss. The
eyes have a S.W.L. of 1.5 tonne and weigh 3.9 kg each. These lifting eyes
fit all standard size rings. Due to their nature they are sale only at
£36.00
each
Click
Here to Download the Full Price List As A Zip File
[HOME]
- [GAS DETECTION] - [LIGHTING]
- [BREATHING APPARATUS] - [TRIPODS
& WINCHES] - [CONTACT US]