Gas Detectors with IR


MGC IR

MGC Gas Detector MGC Gas Detector Rear View
Click on main image to expand

The Gas Clip MGC IR offers reliability on sensing flammable and toxic gases at an affordable price. The unit uses electrolyte cells for detecting H2S, O2 and CO but has an infra red sensor for detecting flammables. This ends all of the problems of cell poisoning for this sensor (see the IR Comparison document). It has a much faster reaction time and will perform where other units either can't or require different pelistors fitted. So if you have a problem with pellistor life or need to look for Jet A1 or kerosene this unit will give you a correct alarm unlike so many other units.

The low power required for running the IR cell also means it has a 60 day run time for the diffusion model.

This unit is perfect for the aircraft and petro chemical industry as well as for tank cleansing where fuels may be the main target gas.

The unit is also IP rated 6 for dust and 1-5 and 7 for water so it is waterproof to 1 metre for 30 minutes.

All charging options are available from 12 to 240v.

Weekly hire rate excluding VAT
MGC IR Gas Detector for H2S, CO, O2 and LEL comes with Case and 240v charger £35.00
Sales price excluding VAT
MGC IR Gas Detector for H2S, CO, O2 and LEL with 240v charger £660.00
Service price excluding parts and VAT
MGC IR 6 Month Calibration and Certification £35.00
Top

MGC P IR

MGC P IR Gas Detector MGC P IR Gas Detector Rear View
Click on main image to expand

The Gas Clip MGC P IR offers a pumped unit that has reliability on sensing flammable and toxic gases at an affordable price. The unit uses electrolyte cells for detecting H2S, O2 and CO. But has an infra-red sensor for detecting flammables. This ends all of the problems of cell poisoning for this sensor (see the IR Comparison document). It has a much faster reaction time and will perform where other units either can't or require different pelistors fitted. So if you have a problem with pellistor life or need to look for Jet A1 or kerosene this unit will give you a correct alarm unlike so many other units.

The low power required for running the IR cell also means it has a 40 hour run time meaning it will always deliver readings even if your working time runs on.

This unit is perfect for the aircraft and petro chemical industry as well as for tank cleansing where fuels may be the main target gas.

The unit is also IP rated 6 for dust and 1-5 and 7 for water so it is waterproof to 1 metre for 30 minutes although water can of course be drawn into the unit through the sampling tube.

All charging options are available from 12 to 240v although the units are supplied with a 240v charger unless you request a different charger.

Weekly hire rate excluding VAT
MGC P IR Gas Detector for H2S, CO, O2 and LEL comes with Case and 240v charger £55.00
Sales price excluding VAT
MGC P IR Gas Detector for H2S, CO, O2 and LEL with 240v charger £940.00
Service price excluding parts and VAT
MGC P IR 6 Month Calibration and Certification £35.00
Top

Gas-Pro IR

Gas-Pro Gas-Pro in use
Click on main image to expand

Gas-Pro is a compact unit offering detection of up to 5 gases at a time with single button operation.

It has multiple alarms with an audible 95dB alarm, bright red/blue all angle LED's and vibrating alerts to provide warning of gas hazards. The top mount display is backlit with a dual colour backlight (green/red).

The Gas-Pro has an 14 hour (13 for pumped operation) battery life with a rechargeable Li-ion and the charge time is around 7.5hrs. It is ATEX approved and rated IP65 and IP67.

The unit can log 125 hours of data at 10 second intervals with a total of 45,000 log entries.

The Gas-Pro unit is available for fresh water or with a customisable set of sensors.

Weekly hire rate excluding VAT
Gas-Pro set for LEL (Pellistor), O2, CO, H2S, CO2 (IR) - Non Pumped £75.00
Gas-Pro set for LEL (Pellistor), O2, CO, H2S, CO2 (IR) - Pumped £85.00
Sales price excluding VAT
Gas-Pro set for LEL (Pellistor), O2, CO, H2S, CO2(IR) - Non Pumped with power lead & 3 year warranty £1,129.00
Gas-Pro set for LEL (Pellistor), O2, CO, H2S, CO2(IR) - Pumped with power lead & 3 year warranty £1,322.00
Service price excluding parts and VAT
Gas-Pro set to any configuration £35.00
Top

Altair 5X IR

Altair 5X Altair 5X in use Altair 5X and charger Altair 5X front, back and side views
Click on main image to expand

The rugged, multi-featured ALTAIR 5X Multigas Detector boasts several options that provide maximum safety and make it easy to use in even the most demanding situations. It features large buttons for easy use, and its polycarbonate housing protects the detector for drops of up to 10 ft (3 m). The detector also boasts the exclusive MotionAlert™, which lets others know if the user has become immobile, and InstantAlert™, a manual alarm that alerts others if a dangerous situation has arisen.

The Altair 5X IR we provide is set for CH4 & O2. The unit has an internal pump so no need to attach a pump whilst working. The Altair 5X comes with 3 years warranty. It can be used for data logging purposes.

The Altair 5X can also be configured for fresh water use or with a customisable set of sensors to meet your detection needs.

Sales price excluding VAT  
Altair 5X IR Set for CH4 & O2, complete with Charger & Tubing £2,116.00 Buy Now

If this is not the configuration you require please contact us on 01404 43000 / 01404 44007.

Service price excluding parts and VAT
Altair 5X IR with any Configuration of Sensors £35.00
Top

PS500 IR

PS500 Gas Detctor PS500 Gas Detctor
Click on main image to expand

The PS500 is a rugged, small and lightweight portable gas detector with a simple two button operation which is user friendly.

The PS500 has a high intensity penetrating and distinctive audible alarm (95dBA) that is particularly useful in noisy environments, together with a bright visual alarm.

The PS500 offered is set up for CH4 & O2.

The PS500 can also be configured for fresh water use or with a customisable set of sensors to meet your detection needs.

Sales price excluding VAT
PS500 IR, Set for CH4 & O2 (non-pumped) £564.00
PS500 IR, Set for CH4 & O2 (pumped) £718.00

If this is not the configuration you require please contact us on 01404 43000 / 01404 44007.

Service price excluding parts and VAT
PS500 IR with any Configuration of Sensors £35.00
Top

Related Items: