Harnesses

The BT Pole Choke Harness set has been developed with Capital Safety Group to offer a fully compliant harness set that will allow the lanyard to be self-choked. This is a unique design and gives increased safety as this set will offer protection for both class 1 and 2 falls even when choked.

The harness was designed with comfort in mind and ease of use and incorporates the latest fast fit buckles. Add to this the built in fall indicators and tool holders and this will not only offer protection but a useful tool too.

The positioning belt is of standard construction although has a larger wearing cover as this was asked for at the time of development.

This is truly the most exceptional set for this type of work and will offer protection where other sets do not.

The FA 10 105 00 Twin Point full body harness offers superb value for money with all of the refinements. This harness fully conforms to EN361 for fall arrest and gives adjustment at both the chest and the legs making it very comfortable to wear.

Ideal for use in confined spaces using fall arrest retrieve blocks.

The FA 10 106 00 Twin Point full body harness with rescue strap again offers superb value for money with all of the refinements. This harness fully conforms to EN361 for fall arrest as well as EN1497 for rescue lifting and lowering.

Adjustment at both the chest and the legs makes it very comfortable to wear. Ideal for use in confined spaces using either fall arrest retrieve blocks or full man riding winches.

When choosing your harness remember that it must display each EN number for which it is required to be fit for purpose.

The FA 10 206 00 is an extremely comfortable suspension harness complete with a work positioning belt. With 1 dorsal and 1 sternal 'D' ring for fall arrest the harness also has a ventral 'D' for rope access.

The 2 lateral 'D's are for work positioning and padded areas for extended comfort are provided.

The harness conforms to EN361, EN358 and EN813 so covers all suspension requirements.

The FA 10 206 00 is an extremely comfortable suspension harness complete with a work positioning belt. With 1 dorsal and 1 sternal 'D' ring for fall arrest the harness also has a ventral 'D' for rope access.

The 2 lateral 'D's are for work positioning and padded areas for extended comfort are provided.

The harness conforms to EN361, EN358 and EN813 so covers all suspension requirements.

RGH1 Single Point Full Body Harness, this unit is a very comfortable entry level harness.

The RGH1 only has a rear attachment point so whilst it conforms to all the necessary legislation you must ensure that rescue is possible from the area in which you are working, should a fall occur.

The harness is made of 45mm water repellent polyester with high tensile steel alloy fittings. The RGH1 is available in four sizes: Small, Standard, Large and X-Large.

• Small: Chest Size 36-42"
• Standard: Chest Size 42-50"
• Large: Chest Size 50-54"
• X-Large: Chest Size 54-58"

The RGH2 is a twin point full body harness, not only does it have a rear attachment but also a chest attachment.

The RGH2 is an ideal choice for confined space working and is fully adjustable with easy slide shoulder adjusters.

The harness is made of 45mm water repellent polyester with high tensile steel alloy fittings. The RGH2 is available in four sizes: Small, Standard, Large and X-Large.

• Small: Chest Size 36-42"
• Standard: Chest Size 42-50"
• Large: Chest Size 50-54"
• X-Large: Chest Size 54-58"

The RGH2 Fast Fit is a twin point full body harness with front and rear attachment points.

The RGH2 Fast Fit is an ideal choice where rapid and simplistic donning and removal is important as it has quick connect buckles on the chest and leg straps.

The harness is made of 45mm water repellent polyester with high tensile steel alloy fittings. The RGH2 Fast Fit is available in four sizes: small, Standard, Large and X-Large.

• Small: Chest Size 36-42"
• Standard: Chest Size 42-50"
• Large: Chest Size 50-54"
• X-Large: Chest Size 54-58"

The RGH2 BigGuy is a twin point full body harness with front and rear attachment points that is approved for users weighing up to 150kg.

The RGH2 BigGuy is fully adjustable with easy slide shoulder adjusters.

The harness is made of 45mm water repellent polyester with high tensile steel alloy fittings. The RGH2 BigGuy is available in two sizes: Large and X-Large.

• Large: Chest Size 50-54"
• X-Large: Chest Size 54-58"

The new innovative RGH2 Glow harnesses are specifically designed for use within the rail industry with new reflective yarn woven into the orange webbing - the first of its kind, providing unprecedented levels of visibility in low light areas.

• 45mm water repellent high visibility orange polyester webbing
• Front and rear ‘D’ attachment points
• High tensile steel alloy fittings
• Rip Stitch Indicators
• Fully adjustable
• Accredited to EN361

The RGH2 Glow harness is available in four sizes:

• Small: Chest Size 36-42"
• Standard: Chest Size 42-50"
• Large: Chest Size 50-54"
• X-Large: Chest Size 54-58"

The RGH5 is designed for use as a confined space access harness. The front and rear attachment points can be used as standard fall arrest points and the rescue strap can be used for lifting and lowering. The rescue strap keeps the operative in a near vertical position when recovering an unconscious casualty.

Tail tidies allow for convenient and neat storage of excess webbing following adjustment.

The harness is fully adjustable and is fitted with rip stitch indicators. It conforms to EN 361 and EN 1497.

The RGH5 harness is available in four sizes:

• Small: Chest Size 36-42"
• Standard: Chest Size 42-50"
• Large: Chest Size 50-54"
• X-Large: Chest Size 54-58"

The new innovative RGH5 Glow harnesses are specifically designed for use within the confined space industry with new reflective yarn woven into the yellow webbing - the first of its kind, providing unprecedented levels of visibility in low light areas.

• 45mm water repellent high visibility yellow polyester webbing
• Front and rear ‘D’ attachment points and rescue strap
• High tensile steel alloy fittings
• Rip Stitch Indicators
• Fully adjustable
• Accredited to EN361 and EN1497

The RGH5 Glow Rescue harness is available in four sizes:

• Small: Chest Size 36-42"
• Standard: Chest Size 42-50"
• Large: Chest Size 50-54"
• X-Large: Chest Size 54-58"

The HT Ladytrac is a purpose made ladies’ harness with quick fit buckles and offers real comfort. It is simple to don and is available in 2 styles, the standard EN361 fall arrest version and one with a work positioning belt.

These harnesses have been specifically designed to ensure that impact forces are delivered away from sensitive areas.

The harnesses are available in two sizes:

• S/M: 10-16
• XL: 16-22

The straps are made of 45mm polyester webbing and the ergonomic jacket of black stretch fabric with orange poly cotton.

The RGH35 is a Ladies twin point harness with front and rear ‘D’ attachment points. The high chest ‘V’ ensures that the webbing sits between the breasts so that tissue damage is limited in the event of a fall.

A waist belt and leg pads are included within the design and the leg buckles are quick release.

The harness is available in three sizes:

• Small: 10-12
• Medium: 14-16
• Large: 16+

The harness is made of 45mm water repellent polyester webbing with high tensile steel alloy fittings and accredited to EN361: 2002.

The Ridgegear RGH14 Adventure harness has been specifically designed for adventure use. It caters for a wide age range and size variance and although easy to don it has been designed to be difficult to remove unless assisted by an instructor.

Due to the uses of the harness for the activity market it was noted that the majority of people using them only wear light clothing. With this in mind the manufacturer has built every harness concentrating on the connection points to ensure they are totally smooth.

The harness is made of 45mm water repellent polyester webbing with high tensile steel alloy fittings and accredited to EN 361 & EN 12277.

The harness comes in three sizes:

• Extra Small: Chest Size 20 - 28" Height: 42 - 54"
• Small: Chest Size 25 - 36" Height: 50 - 67"
• Standard: Chest Size 31 - 53" Height 62 - 76"

The Delta full body harnesses feature the patented Delta™ No-Tangle Pad for extra comfort throughout the neck, shoulders and back. The design holds the shape of the harness, making it easier to put on. This added comfort and ease of donning has greatly improved worker acceptance and reduced the probability of improper use.

The patented “stand up” D-ring helps to connect to your fall arrest device.

The Delta also features liquid resistant webbing and revolver vertical torso adjusters that offer simple and fast adjustment that eliminates loose ends and locks into place preventing slippage.

The Exofit full body harness has a ground breaking design that is anti-absorbent and abrasion resistant.

It features a wrap around, no-tangle design that slips on like a vest, making it quicker and easier to put on while providing ventilation, comfort, padding and security.

The materials are soft and lightweight, yet extremely durable. The shoulder, hip and leg padding is built in with a breathable lining that guarantees you will stay dry and comfortable.

The quick release buckles are fast, efficient and totally secure.

This harness can withstand severe demands and has a capacity of 140kg for the wearer.

The FA 10 902 00 removable dorsal pad makes donning a harness easy and also adds extra comfort. The dorsal is simply fitted to the straps front and back using Velcro.

This transforms economy harnesses simply and is able to be re-used even when the original harness it was attached to is no longer fit for use.