Blank Inflatable Pipe Stoppers


Blank End 0.5 Bar Stoppers

Blank End Stoppers Blank End Stopper
Click on main image to expand

Blank inflatable stoppers are a highly effective way of sealing water, sewer & numerous other pipes used for a range of applications.

They can hold back water to 0.5 bar pressure with the correct bracing. Because they are filled remotely with air they can be used in conjunction with a test end for leak location, this can save time and limit an excavation to only the area of the failure.

Each stopper size is shown, along with the range it caters for, for example; a 70-150mm will fit a pipe from 70mm to a maximum size of 150mm and will seal to 0.5 bar for this range.

Because the stoppers are air inflated they can also be deflated for ease of insertion through manholes and other areas that a conventional wind up stopper will not fit. The access entry only needs to be the size of the smallest size in the stopper’s range, so the 70-150mm would need a minimum entry size of 70mm.

Weekly hire rate excluding VAT
70-150mm Blank 1.5 bar £11.00
100-200mm Blank 1.5 bar £15.00
150-300mm Blank 1.5 bar £17.00
200-400mm Blank 1.5 bar £22.00
200-500mm Blank 1.5 bar £28.00
300-600mm Blank 1.5 bar £35.00
500-1000mm Blank 1.5 bar £84.00
800-1400mm Blank 1.5 bar £150.00
600-1000mm Blank 2.5 bar £105.00

Ancillary Items
9 Litre Air Cylinder with Regulator to run Inflation Controller £40.00
110v Compressor to run Inflation Controller £32.50
Hand Pump (must be used with an inflation controller) £4.00
Inflation Controller 1.5 bar £14.00
Inflation Controller 2.5 bar £18.00
10 metre Inflation Hose £2.00
Sales price excluding VAT
Cag-Tek
Cag-Tek 70-150mm Blank 1.5 bar £141.33
Cag-Tek 100-200mm Blank 1.5 bar £170.10
Cag-Tek 150-300mm Blank 1.5 bar £229.25
Cag-Tek 200-400mm Blank 1.5 bar £318.64
Cag-Tek 200-500mm Blank 1.5 bar £382.13
Cag-Tek 300-600mm Blank 1.5 bar £396.55
Cag-Tek 500-1000mm Blank 1.5 bar £1,168.02
Cag-Tek 800-1400mm Blank 1.5 bar £9,300.90
Cag-Tek 500-1000mm Blank 2.5 bar £1,759.10
Cag-Tek 600-1200mm Blank 2.5 bar £2,090.90

Vetter
Vetter 70-150mm Blank 1.5 bar £244.50
Vetter 100-200mm Blank 1.5 bar £272.25
Vetter 150-300mm Blank 1.5 bar £402.00
Vetter 200-400mm Blank 1.5 bar £510.75
Vetter 200-500mm Blank 1.5 bar £733.50
Vetter 300-600mm Blank 1.5 bar £760.50
Vetter 500-1000mm Blank 1.5 bar £1,588.50
Vetter 800-1400mm Blank 1.5 bar £4,785.75

Ancillary Items
9 Litre Air Cylinder to run inflation controller £360.00
HP RED2 Regulator for use in conjunction with 9L cylinder £255.00
110v Compressor to run Inflation Controller £608.95
Hand Pump (must be used with an inflation controller) £74.10
Inflation Controller 1.5 bar £170.95
Inflation Controller 2.5 bar £170.95
10 metre Inflation Hose £25.00

9 Litre Cylinder will require a HP RED2 Regulator please order both items.

Top

Related Items: