Air Test Inflatable Pipe Stoppers


Multisize Test Stoppers

Multisize Stoppers Multisize Stoppers Multisize Stopper Air Test Kit
Click on main image to expand

The Multisize Test Stopper is quite simply the easiest way to achieve a standard 100 over 0 air test. The stoppers are available as either blank or test ends and require one of each for a standard air test, all hire prices are shown as a test pair.

The Multisize can be inflated from either a hand pump or from various types of compressor. The Multisize Stoppers are inflated to 1.5 bar and have a large sealing area so as to ensure an air tight fit on slightly imperfect pipes surfaces. All Multisize Stoppers have a 100mm operating range so may be able to test several pipe sizes being used.

The very fact that the stoppers are inflatable means that they can be deflated, then folded in half on the larger sizes. This then enables them to be taken through small manhole entries where the chamber may hold very large diameter pipes. The stoppers are also much lighter than conventional wind up stoppers making them easier to install and move from area to area.

Weekly hire rate excluding VAT
300/400mm Multisize £34.00
400/500mm Multisize £40.00
500/600mm Multisize £45.00
600/700mm Multisize £65.00
700/800mm Multisize £85.00
800/900mm Multisize £90.00
900/1050mm Multisize £105.00
Ancillary Items:
9 Litre Air Cylinder with Regulator to run Inflation Controller £40.00
110v Compressor to run Inflation Controller £32.50
Hand Pump (must be used with an inflation controller) £4.00
Inflation Controller to go to Site Compressor £14.00
10 metre 1.5 bar Inflation Hose £2.00
Air Test Kit includes 100mm ‘U’ Gauge Ball Pump and Hose £4.00
300mm ‘U’ Gauge £4.00

Multisize prices are in pairs per week.

Sales price excluding VAT
300/400mm Multisize £369.60 each
400/500mm Multisize £448.70 each
500/600mm Multisize £546.00 each
600/700mm Multisize £667.80 each
700/800mm Multisize £740.60 each
800/900mm Multisize £973.00 each
900/1050mm Multisize £1,122.80 each
Ancillary Items:
9 Litre Air Cylinder to run Inflation Controller £360.00
HP RED2 Regulator for use in conjunction with 9L Cylinder £255.00
110v Compressor to run Inflation Controller £608.95
Hand Pump (must be used with an inflation controller) £74.10
Inflation Controller £170.95
10 metre 1.5 bar Inflation Hose £25.00
Air Test Kit includes 100mm ‘U’ Gauge Ball Pump and Hose £27.76
300mm ‘U’ Gauge £33.77

A 9L Cylinder will require a HP RED2 Regulator, please order both items.

Top

Related Items:

Top